* Go to http://192.168.1.1 * The default login is "root" with the password "12345" * Ignore the DSL Auto-connect and click "Advanced Setup" instead. ** (this would eventually work but takes a long time) * Click "Add" * leave VPI as "0", VCI as "35", Service Category as "UBR Without PCR", and Enable Quality of Service unchecked. * Click Next * select the "PPP over Ethernet (PPPoE)" radio button * Leave "Encapsulation Mode" as "LLC/SNAP-BRIDGING" * Leave "Enable 802.1q" unchecked * Click Next * Enter your SEIData username (without the @seidata.com) in the "PPP Username" field. * Enter your corresponding password in the "PPP Password" field * Leave "PPPoE Service Name" empty * Leave "Authentication Method" set to "AUTO" * It is your choice for "Dial on demand (with idle timeout timer)" - It can be checked for additional security while you are not at your computer, or left unchecked to stay connected. * Leave "PPP IP extension" unchecked * Checkmark "Enable NAT" * Checkmark "Enable Firewall" * Leave "Use Static IP Address" unchecked * Leave "Enable PPP Debug Mode" unchecked * Leave "Fixed MTU" Checked * Leave MTU at "1492" * Click "Next" * Leave "Enable IGMP Multicast" unchecked * Leave "Enable WAN Service" checked * Leave the "Service Name" field alone * Click Next Click Save Click "Save/Reboot"